Annexe C, Codes d'erreurs de 4D Internet Commands

version 2004 (Modifiée)

Toutes les commandes Internet de 4D (à l'exception de IT_ErrorText et IT_Version) sont des fonctions retournant un entier comme résultat. Cet entier contient un numéro d'erreur que la commande doit retourner à la base de données 4D. Si une commande aboutit, un zéro est renvoyé.

L'origine d'une erreur peut généralement être déterminée à partir de l'intervalle de valeurs dans lequel se situe son numéro. Le tableau suivant vous permet de distinguer les sources d'erreurs en fonction de leur numéro :

Numéro d'erreur	Générée par
Erreur < 0	Système d'exploitation ou couche réseau WinSock
0	Pas d'erreur
Erreur 1 -> 61	Couche réseau BSD
Erreur >= 10000	Commandes Internet de 4D

Si une erreur se produit durant l'exécution d'une commande Internet de 4D, une des valeurs suivantes sera retournée :

10000	user cancelled a dialog or progress.
10001	unimplemented Internet command.
10002	invalid array type.
10003	no more (TCP,SMTP,POP3, etc. ) references available.
10004	invalid reference.
10005	need a "Host" for use in the "SMTP_Send" command.
10006	need a "From" for use in the "SMTP_Send" command.
10007	need a recipient for use in the "SMTP_Send" command.
10008	already logged in.
10009	error trying to make a POP3 connection.
10010	error with POP3 USER.
10011	error with POP3 PASS.
10012	error with POP3 QUIT.
10013	error with POP3 STAT.
10014	error with POP3 LIST.
10015	error with POP3 UIDL.
10016	error with POP3 DELE.
10017	error with POP3 RSET.
10018	invalid message number.
10019	invalid character offset.
10020	invalid character length.
10021	error with POP3 RETR.
10022	field was not found in mail Header.
10023	no attachments found.
10024	error in processing BinHex.
10025	BinHex checksum error.
10026	Internet commands unavailable. Probably because MacTCP is not installed
10027	Connection no longer exists
10028	Exceeded 32k limit
10029	Error with POP3 NOOP
10030	POP3 session was closed by the server
10031	Error with POP3 APOP
10032	Unknown or invalid response.
10033	SMTP 421 - Service not available, closing transmission channel.
10034	SMTP 450 - Requested mail action not taken: mailbox unavailable.
10035	SMTP 451 - Requested action aborted: local error in processing.
10036	SMTP 452 - Requested action not taken: insufficient system storage.
10037	SMTP 500 - Syntax error, command unrecognized.
10038	SMTP 501 - Syntax error in parameters or arguments.
10039	SMTP 502 - Command not implemented.
10040	SMTP 503 - Bad sequence of commands.
10041	SMTP 504 - Command parameter not implemented.
10042	SMTP 550 - Requested action not taken: mailbox unavailable.
10043	SMTP 551 - User not local; please try <forward-path>.
10044	SMTP 552 - Requested mail action aborted: exceeded storage allocation.
10045	SMTP 553 - Requested action not taken: mailbox name not allowed.
10046	SMTP 554 - Transaction failed.
10047	FTP 421 - Service not available, closing control connection.
10048	FTP 425 - Can't open data connection.
10049	FTP 426 - Connection closed; transfer aborted.
10050	FTP 450 - Requested file action not taken. File unavailable (e.g.,file busy).
10051	FTP 451 - Requested action aborted: local error in processing.
10052	FTP 452 - Requested action not taken. Insufficient storage space in system.
10053	FTP 500 - Syntax error, command unrecognized.
10054	FTP 501 - Syntax error in parameters or arguments.
10055	FTP 502 - Command not implemented.
10056	FTP 503 - Bad sequence of commands.
10057	FTP 504 - Command not implemented for that parameter.
10058	FTP 530 - Not logged in.
10059	FTP 532 - Need account for storing files.
10060	FTP 550 - Requested action not taken. File unavailable (e.g., file not found, no access).
10061	FTP 551 - Requested action aborted: page type unknown.
10062	FTP 552 - Requested file action aborted. Exceeded storage allocation (for current directory
	or dataset).
10063	FTP 553 - Requested action not taken. File name not allowed.
10064	No response has been received within the given timeout period.
10065	Not a FTP file.
10066	Error in processing Base64.
10067	Error in processing AppleSingle.
10068	Error in processing Quoted-Printable.
10069	FTP session was closed by the server.
10070	Not a FTP directory.
10071	TCP session was closed by the server
10072	Invalid encode kind
10073	Invalid decode kind
10074	An asynchronous DNR call did not complete
10075	An asynchronous OpenTransport call did not complete
10076	OpenTransport bind failed
10077	OpenTransport connect failed
10078	Maximum MacTCP streams reached
10079	Error in processing uuencode
10080	Cannot load ICMP library
10081	Error in processing MacBinary
10082	MacBinary checksum error
10083	Could not open a file
10084	No FTP information received
10085	Unknown FTP information received
10086	Proxy connection failed
10087	Standard file I/O error
10088	FTP reentrant error
10089	SLI.DLL is not loaded
10091	Error trying to make an IMAP connection
10092	A maibox is not selected
10093	Invalid message part
10094	Error with IMAP LOGIN
10095	Error with IMAP LOGOUT
10096	Error with IMAP CAPABILITY
10097	Error with IMAP SELECT
10098	Error with IMAP FETCH
10099	Error with IMAP PARTIAL
10100	Error with IMAP STORE
10101	Error with IMAP EXPUNGE
10102	Error with IMAP SEARCH
10103	Error with IMAP COPY
10104	Error with IMAP CREATE
10105	Error with IMAP DELETE
10106	Error with IMAP RENAME
10107	Error with IMAP SUBSCRIBE
10108	Error with IMAP UNSUBSCRIBE
10109	Error with IMAP LIST
10110	Error with IMAP LSUB
10111	Error with IMAP STATUS
10112	Error with IMAP CLOSE
10113	Error with AUTHENTICATION

1	Operation not permitted
4	Interrupted system call
13	Permission denied
14	Bad address
22	Invalid argument
24	Too many open files
35	Operation would block
36	Operation now in progress
37	Operation already in progress
38	Socket operation on non-socket
39	Destination address required
40	Message too long
41	Protocol wrong type for socket
42	Protocol not available
43	Protocol not supported
44	Socket type not supported
45	Operation not supported
46	Protocol family not supported
47	Address family not supported by protocol family
48	Address already in use
49	Can't assign requested address
50	Network is down
51	Network is unreachable
52	Network dropped connection on reset
53	Software caused connection abort
54	Connection reset by peer
55	No buffer space available
56	Socket is already connected
57	Socket is not connected
58	Can't send after socket shutdown
60	Operation timed out
61	Connection refused

-10004	Blocking call cancelled
-10013	Permission denied
-10014	Bad address
-10022	Invalid argument
-10024	No more sockets available
-10035	Non-blocking socket would block
-10036	Illegal WinSock function invoked while a blocking function is in progress
-10037	An attempt was made to cancel an asynchronous operation that has already completed
-10038	Specified socket descriptor is not valid for this application
-10039	Destination address was required but none was supplied to the function
-10040	Datagram too large for buffer
-10041	Specified protocol does not match the other parameters in the call
-10042	Protocol option is unknown or invalid
-10043	Specified protocol is not supported by the Windows Sockects implementation
-10044	Specified socket type is not supported by the specified address family
-10045	Socket does not support the specified operation
-10046	Protocol family not supported
-10047	Specified address family is not supported by the Windows Sockects implementation or
	cannot be used with the indicated socket
-10048	Specified address is already in use
-10049	Specified address is not available from the local machine
-10050	Problem with the network subsystem
-10051	Network cannot be reached from this host at this time
-10052	Connection was dropped and must be reset
-10053	Connection was aborted because of a timeout or other error condition
-10054	Connection was reset by the remote host
-10055	Windows Sockets implementation is out of buffer space or the space provided in an API
	call by the application was too small to hold the requested information
-10056	Specified socket is already connected
-10057	Specified socket is not connected
-10058	Socket has had the requested functionality shut down
-10060	Connection attempt timed out before the connection could be established
-10061	Connection attempt was forcefully rejected
-10091	Network subsystem is not yet ready for communication
-10092	Windows Sockets DLL does not support the requested Winsock protocol version
-10093	Windows Sockets not initialized
-11001	Requested database information does not exist; as confirmed by an authoritative host
-11002	Requested information was not found but the answer was not authoritative
-11003	Non-recoverable error occurred
-11004	Name supplied was valid but no information of the requested type is in the database

Les valeurs suivantes ne sont pas des codes d'erreurs retournés par les commandes Internet de 4D. Ce sont les codes de réponses définis pour le protocole SMTP afin d'indiquer l'état courant de la communication en mode client-serveur. Cette liste est particulièrement utile dans le cas où vous souhaitez créer votre propre système de messagerie à l'aide des commandes TCP de bas niveau.

211	System status, or system help reply
214	Help message [Information on how to use the receiver or the meaning of a particular
	non-standard command; this reply is useful only to the human user]
220	<domain> Service ready
221	<domain> Service closing transmission channel
250	Requested mail action okay, completed
251	User not local; will forward to <forward-path>
354	Start mail input; end with <CRLF>.<CRLF>
421	<domain> Service not available, closing transmission channel [This may be a reply to
	any command if the service knows it must shut down]
450	Requested mail action not taken: mailbox unavailable [E.g., mailbox busy]
451	Requested action aborted: local error in processing
452	Requested action not taken: insufficient system storage
500	Syntax error, command unrecognized [This may include errors such as command line
	too long]
501	Syntax error in parameters or arguments
502	Command not implemented
503	Bad sequence of commands
504	Command parameter not implemented
550	Requested action not taken: mailbox unavailable [E.g., mailbox not found, no access]
551	User not local; please try <forward-path>
552	Requested mail action aborted: exceeded storage allocation
553	Requested action not taken: mailbox name not allowed [E.g., mailbox syntax incorrect]
554	Transaction failed

Les valeurs suivantes ne sont pas des codes d'erreurs retournés par les commandes Internet de 4D. Ce sont les codes de réponses définis pour le protocole FTP afin d'indiquer l'état courant de la communication en mode client-serveur. Cette liste est particulièrement utile dans le cas où vous souhaitez créer votre propre système de transfert de fichiers à l'aide des commandes TCP de bas niveau.

110	Restart marker reply. In this case, the text is exact and not left to the particular
	implementation; it must read:
	MARK yyyy = mmmm
	Where yyyy is User-process data stream marker, and mmmm server's equivalent
	marker (note the spaces between markers and "=").
120	Service ready in nnn minutes.
125	Data connection already open; transfer starting.
150	File status okay; about to open data connection.
200	Command okay.
202	Command not implemented, superfluous at this site.
211	System status, or system help reply.
212	Directory status.
213	File status.
214	Help message on how to use the server or the meaning of a particular non-standard
	command. This reply is useful only to the human user.
215	NAME system type. Where NAME is an official system name from the list in the
	Assigned Numbers document.
220	Service ready for new user.
221	Service closing control connection. Logged out if appropriate.
225	Data connection open; no transfer in progress.
226	Closing data connection. Requested file action successful (for example, file transfer or file
	abort).
227	Entering Passive Mode (h1,h2,h3,h4,p1,p2).
230	User logged in, proceed.
250	Requested file action okay, completed.
257	"PATHNAME" created.
331	User name okay, need password.
332	Need account for login.
350	Requested file action pending further information.
421	Service not available, closing control connection. This may be a reply to any command if
	the service knows it must shut down.
425	Can't open data connection.
426	Connection closed; transfer aborted.
450	Requested file action not taken. File unavailable (file busy).
451	Requested action aborted: local error in processing.
452	Requested action not taken. Insufficient storage space in system.
500	Syntax error, command unrecognized. This may include errors such as command line
	too long.
501	Syntax error in parameters or arguments.
502	Command not implemented.
503	Bad sequence of commands.
504	Command not implemented for that parameter.
530	Not logged in.
532	Need account for storing files.
550	Requested action not taken. File unavailable (e.g., file not found, no access).
551	Requested action aborted: page type unknown.
552	Requested file action aborted. Exceeded storage allocation (for current directory or
	dataset).
553	Requested action not taken. File name not allowed.